Racks & Cabinets

Flexible Design with precise dimension for all Telecommunication applications.
Superior solution for Fiber Cables Management.
Extremely high packaging density & efficient cable management. Fiber management is provided on both sides of the Mounting Angles. Wide Range of Splice, Patch & Cable Storage Options.
Meeting requirements of under-Base Cable entry ventilation and prevention.
Loading Capacity:
Static Loading: 500 Kg
Material:
Cold Rolled Steel 2.0 mm for main frame and 1.2 mm for others
Can be equipped with Mounting Angles in both Designs 19″ and Metric    , ,
Surface Finish:
Holes Standards.
Mounting Angles are Full Height and can be adjusted in position to accommodate 19″ instruments or 21″ instruments.
FMG Rack is offered with Standard Dimensions of the Rack : 900 Width x 300 Depth .
Easy removable Side Doors for better Cable accessibility. Side Doors equipped with Dual Locks.

Produced in sizes 21”48U Width 600 or 800 mm
Depth 600, 800, 1000mm
Frame construction; 1.5 mm, 2 mm sheet steel
Color powder coated RAL (standard RAL 7035, 9005)
Door with swivel handle lock (single or mullpoint); other locks on request
Doors: perforated steel, vertically double doors.
Rear panel with bottom perforation as standard; optionally can be replaced by full range of doors.
Reversible door – easy re-hanging to open on right or left (at installation site)
Door opening angle 180°
Removable side panels with lock; easy access to installed devices, security, and fast installation and dismantling
Bottom frame with openings for cable entry (220×100 mm)
covered with removable blank panels; racks 800 mm wide have four additional covered cable entry openings (220×100 mm)
Top frame perforated for effective ventilation Ventilation unit can be installed in top frame Four sliding 19″ vertical Mounting angles
Possibility to adapt 800 mm wide racks for installation of 21″ equipment (on request)
Adaptor used for modification of 19″ accessories for 21″ mounting Adjustable feet as standard; castor wheels, lockable castor wheel, plinth, optionally
GND/earthing kit
Load rating max. 400 kg balanced load; 600 kg optionally Standard protection rating IP30; optionally lP41, lP20 when perforated doors use

Produced in sizes 3U”21U Single Section / Double Section Width 600mm
Depth 500, 550, 600mm or 450+100 and 500+100mm Frame construction; 1.2 mm sheet steel
Color powder coated RAL (standard RAL 7035, 9005) Door with Single point lock; other locks on request
Wide variety of doors: Tempered security glass door (as standard front door); optionally solid steel, perforated steel, vertically double doors etc. Solid Rear panel with hanging holes
Reversible door – easy re-hanging to open on right or left (at installation site)
Door opening angle 180°
Removable side panels with plastic latch lock; easy access to installed devices, security, and fast installation and dismantling
Top/Bottom plates with knock out openings for cable entry Top frame perforated for effective ventilation
Ventilation unit can be installed in top frame Four sliding 19″ vertical Mounting angles
Possibility to adapt 800 mm wide racks for installation of 21″ equipment (on request)
Adaptor used for modification of 19″ accessories for 21″ mounting GND/Earthing kit
One standard 19” shelf
Load rating max. 200 kg balanced load; 300 kg optionally Standard protection rating lP30; optionally lP41, IP20 when perforated doors used